N/A Item # - 38560
Metal Halide (Standard, UVA, Longwave)

Item # - 36970
Mercury (UVB, Shortwave)

Item # - 36658
Visible

N/A

• For customer in Europe, the appropriate power cord will be added
• Intensity readings vary widely depending on the make and model of the radiometer. These intensities were measured with the ACCU-CAL™ 50 radiometer.

N/A

• Powerful UV light-curing lamps (up to 225 mW/cm²) - Measured with a Dymax® ACCU-CAL™ 50 Radiometer (320 - 395 nm) at a lamp height of 3 in (7.62 cm) using a standard metal halide bulb.
• Standard systems contain a metal halide bulb (longwave) but two additional bulb options (shortwave and visible) are available for order
• Two flood lamp options available: 5 in x 5 in (12.7 cm x 12.7 cm) and 8 in x 8 in (20.3 cm x 20.3 cm)
• 100% shielding with safety interlock
• Easy-to-adjust tray height
• Shutter that can be actuated by foot pedal or PLC Bulbs are warranted for 2,000 hours - Warranty covers bulb ignition only. Intensity is not warranted.
• Lamp turn-off when the Light Shield door is open
• Containment of non-passive lamp failure
• Reduced light leakage with the new ECE Light Shield design
• Redesigned mounting plate for the ZIP Shutter reduces light leakage

N/A Item # - 35572
Description - Dymax® UV light-curing flood lamps require warm-up and cool-down time. For that reason, it is not possible to control exposure by turning lamp power on/off. Shutters, however, can be used to control exposure time. Dymax® offers the "Manual shutter shown open" shutters for use with the ECE 2000 and 5000 flood-lamp curing systems.
Low-cost louvered shutter. Simple hand turn knob opens and closes shutter.
Dimensions (W x D x H) - 11.3" x 11.1" x 2.5" (28.7 cm x 28.2 cm x 6.4 cm)

Item # - 40885
Description - ECE ZIP™ Shutter
Dymax® UV light-curing flood lamps require warm-up and cool-down time. For that reason, it is not possible to control exposure by turning lamp power on/off. Shutters, however, can be used to control exposure time. Dymax® offers the "ZIP™ shutter shown open" shutters for use with the ECE 2000 and 5000 flood-lamp curing systems.
Electronic, curtain-style shutter. Actuated via finger switch, foot pedal, or customer supplied switch (or PLC).
Dimensions (W x D x H) - 12.5" x 12.9" x 3.8" (31.8 cm x 32.8 cm x 9.7 cm)

Item # - 41097
Description - Stainless Steel Curtain Replacement Kit
Dymax® UV light-curing flood lamps require warm-up and cool-down time. For that reason, it is not possible to control exposure by turning lamp power on/off. Shutters, however, can be used to control exposure time. Dymax® offers the "ZIP™ shutter shown open" shutters for use with the ECE 2000 and 5000 flood-lamp curing systems.
Electronic, curtain-style shutter. Actuated via finger switch, foot pedal, or customer supplied switch (or PLC).
Dimensions (W x D x H) - 12.5" x 12.9" x 3.8" (31.8 cm x 32.8 cm x 9.7 cm)

Item # - 38290
ECE 2000 Mounting Stand Kit
Description - Dymax® offers two shielding options for its UV-curing flood systems, a mounting stand kit and a light shield.
A simple and cost effective 3-sided shield that is removed manually. Not compatible with Dymax® shutters.
Dimensions (L x W) - ECE 2000: 8.5" x 10.8" (21.6 x 27.4 cm)

Item # - 38289
ECE 5000 Mounting Stand Kit
Description - Dymax® offers two shielding options for its UV-curing flood systems, a mounting stand kit and a light shield.
A simple and cost effective 3-sided shield that is removed manually. Not compatible with Dymax® shutters.
Dimensions (L x W) - ECE 5000: 7.0" x 6.1" (17.8 x 15.5 cm)

Item # - 40785
Description - Dymax® offers two shielding options for its UV-curing flood systems, a mounting stand kit and a light shield.
360º shielding. Swing up door and slide out shelf. Compatible with Dymax® shutters.
Inside Dimensions (W x D x H) - 13.2" x 12.5" x 8.3" (35.53 cm x 31.75 cm x 21.08 cm)
Outside Dimensions (W x D x H) - 15.1" x 18.2" x 10.6" (38.42 cm x 46.25 cm x 26.83 cm)

Item # - 41170
Item Name - North American Version (120 V Plug)
Description - With Mounting Stand

Item # - 41180
Item Name - Asian Version (Type G Plug)
Description - With ECE Light Shield

Item # - 40920
Item Name - No Power Cord (The appropriate power cord is included for orders in Europe.)
Description - With ECE Light Shield & Manual Shutter

Item # - 41190
Item Name - North American Version (120 V Plug)
Description - With ECE Light Shield & ECE ZIP™ Shutter

Item # - 41200
Item Name - Asian Version (Type G Plug)
Description - With Mounting Stand

Item # - 40870
Item Name - No Power Cord (The appropriate power cord is included for orders in Europe.)
Description - With ECE Light Shield

Item # - 40810
Item Name - North American Version (120 V Plug)
Description - With ECE Light Shield & Manual Shutter

Item # - 40860
Item Name - Asian Version (Type G Plug)
Description - With ECE Light Shield & ECE ZIP™ Shutter

Item # - 40790
Item Name - No Power Cord (The appropriate power cord is included for orders in Europe.)
Description - With Mounting Stand

Item # - 41040
Item Name - North American Version (120 V Plug)
Description - With ECE Light Shield

Item # - 41060
Item Name - Asian Version (Type G Plug)
Description - With ECE Light Shield & Manual Shutter

Item # - 40830
Item Name - No Power Cord (The appropriate power cord is included for orders in Europe.)
Description - With ECE Light Shield & ECE ZIP™ Shutter

N/A The intensity generated by Dymax® flood systems is very consistent. With continuous use, bulb degradation of less than 20% over the first 2,000 hours is typical. Power on/off cycle's temperature, humidity, and operating environment all have an effect on intensity degradation and will affect bulb life.

The ACCU-CAL™ 150 radiometer is simple to operate and offers repeatable measurement of curing energy. The Dymax® ACCU-CAL™ 150 can measure UV light emitted from UV flood system, and UV conveyors.