Dymax Corp. - Dymax® 1200-EC Series Focused Beam Ultraviolet (UV) Light-Curing Flood Lamp Systems

Unit of Measure

Items	39930 Dymax® 1200-EC Series 47 to 63 Hertz (Hz) Input Frequency Focused Beam Ultraviolet (UV) Light-Curing Flood Lamp System	39920 Dymax® 1200-EC Series 47 to 63 Hertz (Hz) Input Frequency Focused Beam Ultraviolet (UV) Light-Curing Flood Lamp System
Description	N/A The Dymax® 1200-EC focused beam UV light curing flood lamp delivers high intensity UV/Visible light for the rapid curing of UV adhesives, coatings, and inks. This flood lamp delivers broad-spectrum energy concentrated primarily in the UV-A range (320-390 nm wavelength) to achieve maximum cure depths and tack-free curing of a variety of formulations. The lamp is specifically designed for applications requiring high-intensity UV light concentrated in a narrow 1 in x 6 in beam. The 1200-EC lamp is available with or without shielding and can be used as bench-top curing system or easily integrated into a light-curing conveyor system.
Brands	N/A Dymax® ACCU-CAL™
Type	N/A 1200-EC Modular with Mounting Stand	N/A 1200-EC Modular with Light Shield
Power Supply	N/A 90 to 264 V
Input Frequency	N/A 47 to 63 Hz
Power Supply Length	N/A 12 in30.5 cm
Power Supply Width	N/A 16 in40.6 cm
Power Supply Height	N/A 4.25 in10.8 cm
Power Supply Weight	N/A 12.25 lb5.6 kg
Typical Intensity Output¹	N/A 350 mW/cm²
Ultraviolet A (UVA) Range	N/A 320 to 390 nm
Output Power	N/A 400 W
Illuminated Area Length	N/A 1 in2.5 cm
Illuminated Area Width	N/A 6 in15.2 cm
Housing Length	N/A 9 in22.9 cm
Housing Width	N/A 10.5 in26.7 cm
Housing Height	N/A 7.5 in19.1 cm
Housing Weight	N/A 3.4 lb1.5 kg
Bulb Options	N/A 36658 : Visible 36970 : Mercury (UVB, Shortwave) 38560 : Metal Halide (Standard, UVA, Longwave)
Industry Standards	N/A European Conformity
Curing Area	N/A 1 x 6 in2.5 x 15.2 cm
Working Distance	N/A 5.08 to 15.24 cm2 to 6 in
Typical Degradation²	N/A < 20 %
System Options³	N/A With Mounting Stand	N/A With EC Light Shield
Broad-Spectrum Flood Lamps	N/A Dymax® broad-spectrum flood curing systems use moderate- to high-intensity (105-350 mW/cm₂) UV/visible light to cure UV light-curable adhesives, coatings, and inks in as little as 5-30 seconds. Systems are available with 5" x 5" (127 mm x 127 mm) or 8" x 8" (203 mm x 203 mm) curing areas. They come standard with a 400 watt metal-halide bulb but can be outfitted with longwave, shortwave, UV, and visible replacement bulbs to fit unique applications. All bulbs have a long service life and come with a 2,000 hour warranty.
Light Emitting Diode (LED) Flood Curing Systems	N/A Dymax® LED flood lamp systems use high-intensity LEDs to cure a 5" x 5" (12.7 cm x 12.7 cm) area. Because these flood systems use a high-intensity LED as the curing source they produce faster cure times, more consistent frequency and intensity output, a cooler curing environment for thermally sensitive substrates, and longer bulb life than conventional arc lamps. Systems are available in three different wavelength arrays (365, 385, and 405 nm) so users can fully optimize the curing process between their light-curable material and the curing system.
Features	N/A High-intensity 1 in x 6 in focused beam of UV light Typical cure times of 10 to 30 seconds Rugged brushed aluminum construction 100 % shielding with safety interlock kit UV light shielding available Ideal for UV curing trays of small parts Bulbs are warranted for 2000 hours Can be conveyor mounted or used as stand-alone, bench top system (with appropriate light shielding) 4.5 in focal distance Adjustable Lamp Height
Manufacturing Notes	N/A Intensity readings vary widely depending on the make and model of the radiometer. These intensities were measured with the ACCU-CAL™ 50 radiometer. Measured 4.5 in from the bottom edge of the reflector housing.
Additional Information	N/A EC-series flood-lamp systems are ideal for light curing large parts or curing many small parts simultaneously. With intensities ranging from 105-350 mW/cm₂, Dymax® flood lamps are capable of curing most UV light-curable adhesives, sealants, and coatings, tack free in 30 seconds or less. These flood lamps can be incorporated into automated assembly systems or mounted onto conveyors. Dymax® flood units can also be used as turnkey bench-top units (with optional shutters). Broad-spectrum & LED Flood-curing Systems Flood-style curing systems usually provide moderate to high-intensity light. These units have the advantage of being able to cure a tray of parts, or parts with large bonded or coated areas. These kinds of lamps are commonly integrated into existing manufacturing processes by mounting them above high-speed assembly lines. Fairly deep cures can be achieved by these relatively inexpensive units at 10- to 30-second exposure times. Wide-area flood lamps are used successfully to cure substrates that are somewhat heat-sensitive, such as certain plastics. Dymax® currently offers both broad-spectrum and LED flood curing systems to fit a wide variety of curing applications. Shutter assemblies, mounting stands, shields, and other accessories are available to order to create custom bench-top curing systems. CE marked units are available for manufacturers in Europe.
¹ Measured with a Dymax® ACCU-CAL™ 50 Radiometer (320-395 nm) at a lamp height of 3" using a standard metal halide bulb. ² Over 2,000 hours ³ All part numbers include a North American power cord (120 V plug).