COMPANY HEADER
Request Information
Light-cure conformal coatings cure tack-free in seconds upon exposure to UV/Visible or LED light and feature secondary heat or moisture-cure capability for shadow areas on PCBs. They protect printed circuit boards and components from extreme environmental conditions such as heat, chemicals, and humidity.

  • UV/Visible/LED light cure in seconds
  • Multi-Cure and Dual-Cure products (secondary heat or moisture cure)
  • High visibility fluorescence for inline Q.C.
  • One-part formulations, no solvents added
  • IPC and MIL SPEC approvals; some meet NASA ASTM E595 Low Outgassing
  • Flexible and rigid bonds to FPB and PCB substrates
  • Temperature/humidity resistance
  • Black coatings to hide sensitive circuitry
Unit of Measure

Specifications

Brands

 N/A Dymax® Multi-Cure®

Approvals

 N/A IPC-CC-830-B MIL-I-46058C

Halogen Free?

 N/A Yes

Ultraviolet (UV)/ Visible Light

 N/A Yes

Heat

 N/A Yes

Uncured Properties

Nominal Viscosity

 N/A 850 cP

Cured Mechanical Properties

Durometer Hardness

 N/A D70

Tensile at Break

 N/A 21.7 MPa3,150 psi

Elongation at Break

 N/A 100 %

Modulus of Elasticity

 N/A 310 MPa45,000 psi

Electrical Properties

Dielectric Strength

 N/A > 1,500 V/mil

Industries Served

N/A Automotive
Typical applications include speedometer circuitry, engine control modules and sensors, door and window controls, airbag sensors, audio circuitry, and more.

Instrumentation
Typical applications include sensor circuits, display connectors, mother boards, and more.

Smart Connected Devices
Typical applications include PCBs for camera modules, tablets, cell phones, computers, wearables, and more.

Appliance
Typical applications include control boards, sensors, and modules used in handheld power tools, appliance sub-components, small consumer appliances, and major home appliances.

Industrial
Typical applications include circuit boards used in electrical sockets, power supplies, and switches.

Environmental Benefits of Dymax® Light-Curable Materials

N/A Dymax® understands that safe, ecologically friendly products benefit our customers, the environment, and us.
We have created materials that minimize ecological impact. These attributes include:

  • No solvents added materials
  • Halogen-free materials
  • REACH - no substance of very high concern (SVHC)
  • Eco-friendly, one-component materials
Dymax® Halogen-Free conformal coatings, encapsulants, and adhesives are documented by an independent laboratory to meet or exceed standards set forth in IEC 61249-2-21. This international directive defines halogen-free as < 900 ppm for chlorine, < 900 ppm for bromine and < 1,500 ppm total level of both combined. The current test method used for certification is BS EN 14582:2007.

Additional Key Features

N/A

  • Black grades available
  • Variety of available viscosities

Additional Information

N/A Reliable Board Protection in Seconds.

Note

N/A Other grades are available for specific applications requiring physical properties different from standard products listed here.