COMPANY HEADER
Request Information
CE Marked – Available Globally

Dymax® BlueWave® MX-series multichannel controllers are available in 2- and 4-channel versions, allowing manufacturers to use just one controller to run up to four emitter work stations. Each emitter can be controlled independently of the others or in any combination to produce flood and light bar patterns. Activation can be by foot pedal or through an enhanced PLC and interface. The controllers are compatible with all Dymax® MX-series emitters including the BlueWave® MX-150 spot lamp, BlueWave® MX-250 flood lamp, and BlueWave® MX-275 light bar. Interconnect cables are available in 2-, 5-, 10-, and 20-meters lengths, allowing emitters to be stationed further from the controller.
Unit of Measure

Specifications

Brands

 N/A BlueWave® Dymax®
Light Emitting Diode (LED) Timer1 N/A 0.1 to 999 s

Maximum Timer Accuracy

 N/A 0.1 %

Light Emitting Diode (LED) Activation

 N/A Foot Pedal Liquid Crystal Display (LCD) Touchscreen Programmable Logic Controller (PLC)

Cooling

 N/A Air Cooled

Weight

 N/A 2.6 lb1.18 kg

Unit Warranty

 N/A 1 year from purchase date

Certifications

 N/A Global

Power Supply Input

Power Supply Input Voltage

 N/A 100 to 240 V

Power Supply Input Current

 N/A 2.5 A

Power Supply Input Frequency

 N/A 50 to 60 Hz

Dimensions

Width

 N/A 5.14 in13.1 cm

Depth

 N/A 7.19 in18.3 cm

Height

 N/A 7.35 in18.7 cm

Operating Environment

Operating Temperature

 N/A 10 to 40 ºC50 to 104 ºF

Operating Non-Condensing Relative Humidity

 N/A 0 to 30 %

Features

N/A

  • One controller runs up to four emitters independently by foot switch or as an integrated light bar (50 mm x 200 mm)
  • Reduced controllers decreased required footprint and cost
  • Compatible with BlueWave MX-150 and MX-250 emitters (365, 285, 405 nm versions)
  • Users can easily switch between LED spot and flood curing configurations
  • Simple on/off operation using production mode
  • Application specific curing profiles/programs can be easily entered, stored, and recalled when needed
  • Units can be password protected so only production mode can be accessed by workers
  • Improved user interface: touch screen with full keyboard and stylus for easy menu navigation (attaches to unit)
  • Instant on/off requires no warm up period, improving energy efficiency
  • LED temperature management and system monitoring maximizes operation without overheating, monitors critical system functions, and ensures maximum LED life
  • Remote I/O interface enables easy incorporation into automated systems and improved PLC interface flexibility

Additional Information

N/A Controllers are designed to provide manufacturers with greater curing flexibility. Users can start with a single emitter and add others as their applications grow. Emitter models can be utilized in different combinations with the same controller. For those requiring a spot-cure system, BlueWave® MX-150 emitters can be outfitted with single or multi-pole lightguides to provide up to 16 individual cure spots from a single controller.

Compatible with BlueWave® MX-150 and BlueWave® MX-250 emitters with firmware version 1.08 or higher. Dymax® can easily upgrade emitter firmware to the latest versions by returning your emitter to one of our service facilities.

Note

N/A For European customers, the appropriate power cord will be added.

  • 1 Timer accuracy 0.1%