COMPANY HEADER
Gasket adhesive sealants form in place on complex surfaces and channel configurations, and then cure in place upon exposure to UV/Visible or LED light exposure. They act as a barrier to protect surfaces from dust, noise, and other destructive elements and replace labor-intensive tape, die-cut gaskets, and other sealant technologies.

  • Complete cure to 1/4 inch-thick-beads in little as 30 seconds
  • Excellent adhesion to glass, plastics, plated surfaces, and metal enclosures
  • Low-to-high, non-sag viscosities
  • Eliminate ovens, racks, and stacking
  • Reduce the waste caused by poor fitting or improper alignment of die-cut gaskets
  • Slick-to-pressure-sensitive surface tack
  • Automotive, lighting, electronic mobile device, electrical, HVAC, window, and energy applications
Request Information
Unit of Measure
Items
Gasket Adhesives

60,000 Centipoise (cP) Nominal Viscosity and 00 to 75 Cured Durometer Hardness Gasket Sealant Adhesive
Gasket Adhesives

40,000 Centipoise (cP) Nominal Viscosity and A50 Cured Durometer Hardness Gasket Sealant Adhesive
Gasket Adhesives

1,000 Centipoise (cP) Nominal Viscosity and 00 to 50 Cured Durometer Hardness Gasket Sealant Adhesive
Gasket Adhesives

39,000 Centipoise (cP) Nominal Viscosity and A35 Cured Durometer Hardness Gasket Sealant Adhesive
Gasket Adhesives

40,000 Centipoise (cP) Nominal Viscosity and 00 to 55 Cured Durometer Hardness Gasket Sealant Adhesive
Description N/A Gasket adhesive sealants form in place on complex surfaces and channel configurations, and then cure in place upon exposure to UV/Visible or LED light exposure. They act as a barrier to protect surfaces from dust, noise, and other destructive elements and replace labor-intensive tape, die-cut gaskets, and other sealant technologies.

  • Complete cure to 1/4 inch-thick-beads in little as 30 seconds
  • Excellent adhesion to glass, plastics, plated surfaces, and metal enclosures
  • Low-to-high, non-sag viscosities
  • Eliminate ovens, racks, and stacking
  • Reduce the waste caused by poor fitting or improper alignment of die-cut gaskets
  • Slick-to-pressure-sensitive surface tack
  • Automotive, lighting, electronic mobile device, electrical, HVAC, window, and energy applications
Brands N/A Dymax®
Nominal Viscosity N/A 60,000 cP N/A 40,000 cP N/A 1,000 cP N/A 39,000 cP N/A 40,000 cP
Cured Durometer Hardness N/A 00 to 75 N/A A50 N/A 00 to 50 N/A A35 N/A 00 to 55
Cured Compression Set at 85 Degree Celsius (ºC) Temperature, 22 Hours (h)) N/A 14.9 % N/A 15 % N/A 0.17 % N/A 14.9 % N/A 31 %
Note for Cured Compression Set at 85 Degree Celsius (ºC) Temperature, 22 Hours (h)) N/A Compression set is expressed as percentage of deflection per ASTM D395 Method B at 25% deflection. To determine percent recovery, subtract 1/4 of the value from 100%. For example, the recovery is 98.8% with a 5% compression set.
Recommended Substrates N/A Electroplated Plastics Metals Plastics N/A Metals N/A Metals Plastics N/A Metals Most plastics (Acrylonitrile Butadiene Styrene (ABS), Polyvinyl chloride (PVC), Polycarbonates (PC), Polymethyl methacrylate (PMMA)) Nylon N/A
Features N/A
  • UV/Visible light curing
  • Excellent water resistance
  • Excellent acid/base resistance
  • Self-leveling liquid
  • High/low temperature resistant
  • Cures in seconds
  • Silicone free
  • Low compression set
 N/A
  • Cures with UV/Visible light
  • Cures in seconds
  • Excellent tear resistance
  • Conforms to intricate channels or recesses
  • Cures soft and tack free
  • Moisture-resistant sealing
  • Low outgassing
  • Silicone free
 		N/A
  • Cures with UV/Visible light
  • Soft, tacky gasket
  • Self-leveling viscosity
  • Cures in seconds
  • Greatest deflection
  • Good adhesion to nylon and metals
  • Silicone free
  • No solvents added
 		N/A
  • Cures with UV/Visible light
  • Low outgassing
  • Cures soft and tack free
  • Excellent tear resistance
  • Clear in color
  • Cures in seconds
  • Silicone free
  • Conforms to intricate channels or recesses
 		N/A
  • Cures with UV/Visible light
  • Good adhesion to nylon and metals
  • Soft, tacky gasket
  • Cures in seconds
  • Silicone free
Additional Information N/A FIP Moisture and Chemical Resistant Gasketing Resin

Dymax® GA-103 is a Form-in-Place (FIP) and Cure-in-Place (CIP) gasketing resin formulated for fuel cells, underwater enclosures, and high-temperature sealing applications that require low compression set. GA-103 has good adhesion to plastics, electroplated plastics, and metal surfaces while providing superior heat, water, and chemical resistance.

This resin can be dispensed into intricate and complex configurations with the added benefit of curing in-line, which allows for increased production speed, greater output, lower processing costs, and reduced inventories.

Dymax® materials have no solvents added and cure upon exposure to light. Their ability to cure in seconds results in lower processing costs. When cured with Dymax® UV light curing spot lamps, focused beam lamps, flood lamps, or conveyor systems they deliver optimum speed and performance for maximum efficiency. Dymax® lamps offer the optimum balance of UV and visible light for the fastest, deepest cures. 		N/A Light-Curable FIP/CIP Tack-Free Gasketing Resin

GA-112 is a form-in-place, cure-in-place gasket adhesive that cures in seconds upon exposure to UV/Visible light energy. The product is ideal for applications requiring compression set and tack-free surface, as well as durable sealing. This gasketing resin is easily dispensed into intricate and complex configurations. The added benefit of curing in-line allows for increased production speed, greater output, lower processing costs, and reduced inventories.

Dymax® materials have no solvents added and cure upon exposure to light. Their ability to cure in seconds results in lower processing costs. When cured with Dymax® UV light curing spot lamps, focused beam lamps, flood lamps, or conveyor systems they deliver optimum speed and performance for maximum efficiency. Dymax® lamps offer the optimum balance of UV and visible light for the fastest, deepest cures. 		N/A Light-Curable, Self-Leveling Flexible FIP Gasket Resin

Dymax® GA-120 is a form-in-place (FIP) and cure-in-place (CIP) gasketing resin formulated for immediate parts processing and increased throughput. This product is ideal for speaker assembly, sound damping, and automotive enclosures applications which require soft, tacky, flexible gasket with good deflection and self-leveling viscosity.

This gasketing material has good adhesion to plastic as well as metal surfaces. Easily dispense this resin into intricate and complex component configurations. The added benefit of curing in-line allowing for increased production speed and greater output, as well as reduced inventories.

Dymax® materials have no solvents added and cure upon exposure to light. Their ability to cure in seconds results in lower processing costs. When cured with Dymax® UV light curing spot lamps, focused beam lamps, flood lamps, or conveyor systems they deliver optimum speed and performance for maximum efficiency. Dymax® lamps offer the optimum balance of UV and visible light for the fastest, deepest cures. 		N/A UV-Curable Moisture & Chemical Resistant FIP Gasket

Dymax® GA-140 form-in-place (FIP) and cure-in-place (CIP) gasketing resin is formulated for fuel cell, automotive door handle, appliance housing, and critical electronic assembly and device applications which require a soft, tack-free, low-outgassing, flexible gasket with compression set. GA-140 has good adhesion to nylon and plastic surfaces. Additionally, form-in-place gaskets may help to improve and extend battery life as well as increase their reliability.

The resin can be dispensed in intricate and complex configurations with the added benefit of curing in-line which allows for increased production speed and reduced inventories. It has no solvents added and cures upon exposure to light. The ability of GA-140 to cure in seconds enables faster processing, greater output, and lower assembly costs.

When cured with Dymax® light-curing spot lamps, focused-beam lamps, or flood lamps, it delivers optimum speed and performance for maximum efficiency. Dymax® lamps offer the ideal balance of UV and visible light for the fastest, deepest cures.

This product is in full compliance. 		N/A Flexible, Light-Curable Form-in-Place Gasket Adhesive

Dymax® GA-142 is a form-in-place (FIP) and cure-in-place (CIP) gasketing resin formulated for electrical enclosures, HVAC ductwork, and automotive casing applications which require a soft, sticky, flexible, low compression set. GA-142 has good adhesion to plastic, metal, and also ceramic surfaces. Easily dispense the material into intricate and complex configurations with the benefit of curing in-line, which allows for increased production speed, greater output, lower processing costs, and reduced inventories.

Dymax® materials have no solvents added and cure upon exposure to light. Their ability to cure in seconds results in lower processing costs. When cured with Dymax® UV light curing spot lamps, focused beam lamps, flood lamps, or conveyor systems they deliver optimum speed and performance for maximum efficiency. Dymax® lamps offer the optimum balance of UV and visible light for the fastest, deepest cures.