COMPANY HEADER
Request Information
Gasket adhesive sealants form in place on complex surfaces and channel configurations, and then cure in place upon exposure to UV/Visible or LED light exposure. They act as a barrier to protect surfaces from dust, noise, and other destructive elements and replace labor-intensive tape, die-cut gaskets, and other sealant technologies.

  • Complete cure to 1/4 inch-thick-beads in little as 30 seconds
  • Excellent adhesion to glass, plastics, plated surfaces, and metal enclosures
  • Low-to-high, non-sag viscosities
  • Eliminate ovens, racks, and stacking
  • Reduce the waste caused by poor fitting or improper alignment of die-cut gaskets
  • Slick-to-pressure-sensitive surface tack
  • Automotive, lighting, electronic mobile device, electrical, HVAC, window, and energy applications
Unit of Measure

Specifications

Brands

 N/A Dymax®

Nominal Viscosity

 N/A 1,000 cP

Cured Durometer Hardness

 N/A 00 to 50

Cured Compression Set at 85 Degree Celsius (ºC) Temperature, 22 Hours (h))

 N/A 0.17 %

Note for Cured Compression Set at 85 Degree Celsius (ºC) Temperature, 22 Hours (h))

 N/A Compression set is expressed as percentage of deflection per ASTM D395 Method B at 25% deflection. To determine percent recovery, subtract 1/4 of the value from 100%. For example, the recovery is 98.8% with a 5% compression set.

Recommended Substrates

 N/A Metals Plastics

Features

Features

 N/A
  • Cures with UV/Visible light
  • Soft, tacky gasket
  • Self-leveling viscosity
  • Cures in seconds
  • Greatest deflection
  • Good adhesion to nylon and metals
  • Silicone free
  • No solvents added

Additional Information

Additional Information

 N/A Light-Curable, Self-Leveling Flexible FIP Gasket Resin

Dymax® GA-120 is a form-in-place (FIP) and cure-in-place (CIP) gasketing resin formulated for immediate parts processing and increased throughput. This product is ideal for speaker assembly, sound damping, and automotive enclosures applications which require soft, tacky, flexible gasket with good deflection and self-leveling viscosity.

This gasketing material has good adhesion to plastic as well as metal surfaces. Easily dispense this resin into intricate and complex component configurations. The added benefit of curing in-line allowing for increased production speed and greater output, as well as reduced inventories.

Dymax® materials have no solvents added and cure upon exposure to light. Their ability to cure in seconds results in lower processing costs. When cured with Dymax® UV light curing spot lamps, focused beam lamps, flood lamps, or conveyor systems they deliver optimum speed and performance for maximum efficiency. Dymax® lamps offer the optimum balance of UV and visible light for the fastest, deepest cures.