COMPANY HEADER
Print Back
Multi-Cure® industrial metal bonding adhesives form high-strength bonds to metal and magnets using UV/Visible light, heat (for shadow areas), or pre-applied activator (for opaque substrates). These metal bonders also adhere well to filled nylon, phenolic plastics, polyamide, and dissimilar substrates. Applications include magnet and metal bonding, DC motor assembly, shallow potting, and coil winding.

  • UV/Visible light cure
  • Secondary heat or activator cure (some products)
  • Endure harsh environments
  • Non-corrosive and non-flammable
  • Moisture and temperature resistant (some products)
Unit of Measure

Specifications

Brands

 N/A Dymax® Multi-Cure®

Recommended Substrates

 N/A Ceramic (CER) Glass Metals Phenolic plastics Polyamide (filled/unfilled)

Nominal Viscosity

 N/A 3,500 cP

Cured Tensile at Break

 N/A 28 MPa4,000 psi

Features

Features

 N/A
  • Cures with LED or UV/Visible light
  • Secondary heat cure
  • Activator cure
  • No solvents added
  • Forms rigid adhesive bonds

Additional Information

Additional Information

 N/A Structural Adhesive for Glass, Metal, and Phenolic Plastics

Dymax® Multi-Cure® 6-621-T adhesive forms hard, clear bonds to phenolic plastics, metal, glass, ceramic, polyamide (filled/unfilled), and other substrates. The material cures "on-demand" in seconds with UV/Visible light, heat, or pre-applied activator. 6-621-T structural adhesive can also cure with heat in applications where shadow areas exist. Common applications include metal-to-glass bonding, coil winding, and potting.

Dymax® materials have no solvents added and cure upon exposure to light. Their ability to cure in seconds results in lower processing costs. When cured with Dymax® UV light curing spot lamps, focused beam lamps, flood lamps, or conveyor systems they deliver optimum speed and performance for maximum efficiency. Dymax® lamps offer the optimum balance of UV and visible light for the fastest, deepest cures.