COMPANY HEADER
Print Back
Multi-Cure® industrial metal bonding adhesives form high-strength bonds to metal and magnets using UV/Visible light, heat (for shadow areas), or pre-applied activator (for opaque substrates). These metal bonders also adhere well to filled nylon, phenolic plastics, polyamide, and dissimilar substrates. Applications include magnet and metal bonding, DC motor assembly, shallow potting, and coil winding.

  • UV/Visible light cure
  • Secondary heat or activator cure (some products)
  • Endure harsh environments
  • Non-corrosive and non-flammable
  • Moisture and temperature resistant (some products)
Unit of Measure

Specifications

Brands

 N/A Dymax® Multi-Cure®

Recommended Substrates

 N/A Ceramic (CER) Glass Metals Phenolic plastics Polyamide (filled/unfilled)

Nominal Viscosity

 N/A 25,000 cP

Cured Tensile at Break

 N/A 28 MPa4,000 psi

Features

Features

 N/A
  • Cures with UV/Visible light
  • Secondary heat cure
  • Activator cure
  • Bonds multiple substrates
  • Hard and clear bonds
  • No solvents added

Additional Information

Additional Information

 N/A Structural Bonding Adhesive with Secondary Heat Cure

Dymax® Multi-Cure® 6-621-GEL adhesive cures upon exposure to light and is designed for rapid assembling of parts made of metal, glass, ceramic, phenolic, filled polyamide, and other materials. Dymax® 6-621-GEL adhesive is specially formulated to cure with heat in applications where shadow areas exist. Typical applications include metal-to-glass bonding, coil winding, potting, structural battery bonding, and parts assembly.

Dymax® materials have no solvents added. Their ability to cure in seconds enables faster processing, greater output, and lower processing costs. When cured with Dymax® light-curing spot lamps, focused-beam lamps, or flood lamps, they deliver optimum speed and performance for industrial product assembly. Dymax® lamps offer the ideal balance of UV and visible light for the fastest, deepest cures.