COMPANY HEADER
Print Back
Industrial glass bonding adhesives cure rapidly with UV/Visible light, heat, or activator to form high-strength bonds to various substrates including soft, borosilicate, UV-blocked, and tinted glass. They even bond to lead crystal, steel, plated metals, and thermoset plastics. These optically clear glass bonders exhibit good thermal cycling performance and are suitable for architectural, figurine, furniture, stemware, and novelty assembly.

  • UV/Visible broad-spectrum or LED light cure
  • Secondary heat or activator cure for UV-blocked and tinted glass
  • High temperature
  • Non-yellowing
  • One-component, no mixing
  • No solvents added
Unit of Measure

Specifications

Brands

 N/A Dymax®

Chemistry

 N/A Ultraviolet (UV) Visible

Nominal Viscosity at 20 Revolutions Per Minute (rpm) Speed

 N/A 450 cP

Uncured Appearance

 N/A Colorless

Cured Durometer Hardness

 N/A D60

Tensile at Break

 N/A 11.4 MPa1,650 psi

Elongation at Break

 N/A 130 %

Water Absorption (25 Degree Celsius (ºC) Temperature, 24 Hours (h))

 N/A 4.1 %

Industry Focus

 N/A Aerospace Appliance Automotive Energy Structural & Decorative Glass

Recommended Substrates

 N/A Acrylonitrile-Butadiene-Styrene (ABS) Aluminum (AL) Brass Cellulose Acetate Propionate (CAP) Cold Rolled Steel Glass (GL) Poly Methyl Methacrylate (PMMA) Polyamide (PA) Polycarbonate (PC) Polycyclohexylene Dimethylene Terephthalate Glycol (PCTG) Polyetheretherketone (PEEK) Polyetherimide (PEI) Polyethylene Terephthalate (PET) Polyethylene Terephthalate Glycol (PETG) Polyphenylene Oxide (PPO) Polystyrene (PS) Polyvinyl chloride (PVC) Styrene-Acrylonitrile (SAN) Thermoplastic Polyurethane (TPU)

Substrates

Substrate Bonding

 N/A High-Density Polyethylene (HDPE) Low-Density Polyethylene (LDPE) (Requires Surface Treatment (e.g., Plasma, Corona Treatment, Etc.)

Applications

N/A Glass, Plastic and metal bonding and laminating