COMPANY HEADER
Print Back
Gasket adhesive sealants form in place on complex surfaces and channel configurations, and then cure in place upon exposure to UV/Visible or LED light exposure. They act as a barrier to protect surfaces from dust, noise, and other destructive elements and replace labor-intensive tape, die-cut gaskets, and other sealant technologies.

  • Complete cure to 1/4 inch-thick-beads in little as 30 seconds
  • Excellent adhesion to glass, plastics, plated surfaces, and metal enclosures
  • Low-to-high, non-sag viscosities
  • Eliminate ovens, racks, and stacking
  • Reduce the waste caused by poor fitting or improper alignment of die-cut gaskets
  • Slick-to-pressure-sensitive surface tack
  • Automotive, lighting, electronic mobile device, electrical, HVAC, window, and energy applications
Unit of Measure

Specifications

Brands

 N/A Dymax®

Nominal Viscosity

 N/A 40,000 cP

Cured Durometer Hardness

 N/A A50

Cured Compression Set at 85 Degree Celsius (ºC) Temperature, 22 Hours (h))

 N/A 15 %

Note for Cured Compression Set at 85 Degree Celsius (ºC) Temperature, 22 Hours (h))

 N/A Compression set is expressed as percentage of deflection per ASTM D395 Method B at 25% deflection. To determine percent recovery, subtract 1/4 of the value from 100%. For example, the recovery is 98.8% with a 5% compression set.

Recommended Substrates

 N/A Metals

Features

Features

 N/A
  • Cures with UV/Visible light
  • Cures in seconds
  • Excellent tear resistance
  • Conforms to intricate channels or recesses
  • Cures soft and tack free
  • Moisture-resistant sealing
  • Low outgassing
  • Silicone free

Additional Information

Additional Information

 N/A Light-Curable FIP/CIP Tack-Free Gasketing Resin

GA-112 is a form-in-place, cure-in-place gasket adhesive that cures in seconds upon exposure to UV/Visible light energy. The product is ideal for applications requiring compression set and tack-free surface, as well as durable sealing. This gasketing resin is easily dispensed into intricate and complex configurations. The added benefit of curing in-line allows for increased production speed, greater output, lower processing costs, and reduced inventories.

Dymax® materials have no solvents added and cure upon exposure to light. Their ability to cure in seconds results in lower processing costs. When cured with Dymax® UV light curing spot lamps, focused beam lamps, flood lamps, or conveyor systems they deliver optimum speed and performance for maximum efficiency. Dymax® lamps offer the optimum balance of UV and visible light for the fastest, deepest cures.