COMPANY HEADER
Request Information
Multi-Cure® industrial metal bonding adhesives form high-strength bonds to metal and magnets using UV/Visible light, heat (for shadow areas), or pre-applied activator (for opaque substrates). These metal bonders also adhere well to filled nylon, phenolic plastics, polyamide, and dissimilar substrates. Applications include magnet and metal bonding, DC motor assembly, shallow potting, and coil winding.

  • UV/Visible light cure
  • Secondary heat or activator cure (some products)
  • Endure harsh environments
  • Non-corrosive and non-flammable
  • Moisture and temperature resistant (some products)
Unit of Measure

Specifications

Brands

 N/A Dymax®

Chemistry

 N/A Activator Heat Ultraviolet (UV) Visible

Nominal Viscosity at 20 Revolutions Per Minute (rpm) Speed

 N/A 800 cP

Uncured Appearance

 N/A Colorless

Durometer Hardness

 N/A D80

Tensile at Break

 N/A 22 MPa3,200 psi

Elongation at Break

 N/A 37 %

Linear Shrinkage

 N/A 0.4 %

Water Absorption (25 Degree Celsius (ºC) Temperature, 24 Hours (h))

 N/A 1.7 %

Industry Focus

 N/A Aerospace Appliance Automotive Energy Structural & Decorative Glass

Recommended Substrates

 N/A Acrylonitrile-Butadiene-Styrene (ABS) Aluminum (AL) Ceramic (CER) Cold Rolled Steel Copper Engineering Plastic (EP) Glass (GL) Phenolic Plastic Polyamide (PA) Stainless Steel (SS)

Substrates

Limited Applications

 N/A Polycarbonate (PC) Polyetherimide (PEI) Polyethylene Terephthalate (PET) Polyimide (PI) Polyurethane (PU) Polyvinyl Chloride (PVC)

Applications

N/A Metal-to-glass bonding
Coil winding
Potting