COMPANY HEADER
Request Information
UV/LED light-curable adhesives bond glass and other difficult substrates such as COC/COP thermoplastics used for in-vitro diagnostics applications. Rapid assembly of microplates, lab-on-chip devices, and silicon wafers used in blood and tissue testing is possible with fast light curing, one-component formulations that require no mixing. Products with Dymax® Ecnompass® or patented See-Cure and Ultra-Red® fluorescing technologies are available.

  • UV/Visible broad-spectrum bulb or LED array curing
  • Moisture-resistant formulations (some products)
  • Bond rigid and flexible substrates
  • Encompass, See-Cure, or Ultra-Red® technologies
  • Adhere to difficult substrates like COC/COP
Unit of Measure

Specifications

Brands

 N/A Dymax® MD®

Nominal Viscosity

 N/A 8,000 cP

Cured Elongation at Break

 N/A 170 %

Recommended Substrates

 N/A Acrylonitrile Butadiene Styrene (ABS) Polycarbonate (PC) Polyether Block Amide (PEBA) Polyethylene Terephthalate (PETL) Polyurethane (PU) Polyvinyl chloride (PVC)

Industry Standards

 N/A International Organization for Standardization (ISO 10993)

Properties

Durometer Hardness

 N/A D55

Features

Features

 N/A
  • Cures with UV/Visible light
  • See-Cure - dispense blue, cures colorless
  • Flexible
  • Thixotropic
  • No solvents added
  • Compliant with ISO 10993

Additional Information

Additional Information

 N/A Flexible Plastic Adhesive for Medical Devices

MD® 1201-M-T-SC medical device adhesive is a moisture-resistant multipurpose material for fast bonding of rigid and flexible plastics typically used in medical disposable device assembly. This thixotropic product is formulated with patented See-Cure technology which provides manufacturers with easy visual confirmation of material placement and full cure. Bondable substrates include PC, PVC, PU, ABS, and PET, as well as PEBA. 1201-M-T-SC also meets a variety of ISO 10993 approvals.

Dymax® MD® Medical Device adhesives have no solvents added and cure upon exposure to light. Their ability to cure in seconds enables faster processing, greater output, and lower processing costs. When cured with light-curing spot lamps, focused beam lamps, flood lamps, or conveyor systems they deliver optimum speed and performance for medical device assembly. lamps offer the optimum balance of UV and visible light for the fastest, deepest cures.

MD® 1201-M-T-SC medical device adhesive is in full compliance.