COMPANY HEADER
Request Information
MD® medical respiratory device adhesives cure with UV/LED/Visible light for fast assembly of breathing circuits, anesthesia masks, resuscitator bags, and other airway management apparatus. The adhesives form flexible, strong, moisture resistant bonds to PET, SEBs, ABS, PS, and PVC substrates.

  • UV/Visible/LED light cure
  • Gamma, EtO, and E-Beam sterilization compatible
  • Various ISO 10993 approvals
  • Patented See-Cure color change technology (some products)
  • Ultra-Red fluorescing technology (some products)
  • One-component, no mixing required
Unit of Measure

Specifications

Brands

 N/A Dymax® MD®

Available Grades

Recommended Substrates

 N/A Acrylonitrile Butadiene Styrene (ABS) Polycarbonate (PC) Polystyrene (PS) Polyurethane (PU) Polyvinyl chloride (PVC)

Nominal Viscosity

 N/A 600 cP

Rheology

 N/A Newtonian

Durometer Hardness

 N/A D70

Tensile at Break

 N/A 21 MPa3,000 psi

Elongation at Break

 N/A 40 %

Modulus of Elasticity

 N/A 689 MPa100,000 psi
Fluorescing1 N/A Blue

Substrate Bonding Guide

Recommended Adhesives

 N/A Acrylonitrile-Butadiene-Styrene (ABS) Polycarbonate (PC) Polystyrene (PS) Polyurethane (PU) Polyvinyl Chloride (PVC)

Additional Information

N/A Dymax® MD® Adhesives, specially formulated for disposable medical device assembly, are used in a wide range of applications including catheter, syringe, anesthesia mask, reservoir, tube set, and medical electronics assembly. They help optimize assembly speeds to enable faster processing, greater output, and lower processing costs while allowing for 100% in-line inspection of bond lines. All of our adhesives are no solvents added and meet both USP Class VI and ISO 10993 biocompatibility standards.

MD® adhesives are intended for use in short-term (<29 days) or single-use disposable-device applications only. Dymax® does not authorize their use in long-term implant applications. In all cases, it's the user's responsibility to determine and validate the suitability of these adhesives in the intended medical device.

Compatible sterilization methods include gamma irradiation and ethylene oxide. Sterilization by autoclaving may be limited to certain applications. It remains the user's obligation to ascertain the effect of sterilization on the cured adhesive.

Note

N/A Individual Product Data Sheets (PDS) list complete test data, with copies of test reports available upon request.

  • 1 U.S. Patents 6,080,450 & 7,892,386.