COMPANY HEADER
Request Information
Multipurpose medical device adhesives are designed to rapidly bond medical-grade plastics upon exposure to UV/Visible light. The products meet ISO approvals and bond well to many different substrates including tinted and UV-inhibited plastics. Some formulations feature patented Encompass® technology which enables easy visual confirmation of adhesive placement and cure and fluorescence for post-cure quality inspection.

  • UV/Visible/LED light cure
  • ISO 10993 compliant
  • Compatible with E-Beam, gamma, and EtO sterilization
  • Single-component materials require no mixing
  • Secondary heat-cure capability for shadow areas (some products)
  • See-Cure technology for cure confirmation (some products)
  • Blue or Ultra-Red® fluorescing for quality inspection (some products)
Unit of Measure

Specifications

Brands

 N/A Dymax® MD®

Nominal Viscosity

 N/A 24,000 cP

Cured Durometer Hardness

 N/A D50

Cured Elongation at Break

 N/A 200 %

Recommended Substrates

 N/A Polycarbonates (PC) Polyether Block Amide (PEBA) Polyethylene Glycol (PEG) Polyethylene Terephthalate (PCTG) Polyethylene Terephthalate Glycol (PETG) Polystyrene (PS) Polyvinyl chloride (PVC) Styrene Acrylonitrile Resin (SAN)

Features

Features

 N/A
  • Fast cure with UV /Visible light
  • No solvents added
  • Fluoresces blue under black lights
  • Flexible
  • Compliant with ISO 10993

Additional Information

Additional Information

 N/A Moisture-Resistant Multipurpose Medical Device Adhesive

Rapidly bond flexible and rigid plastics typically used in medical device assembly with MD® 1187-M-GEL medical device adhesive. This moisture-resistant, flexible plastics bonder cures in seconds upon exposure to UV/Visible light. The product is ideally suited for the assembly of tube sets, fittings, and reservoirs, as well as drug delivery devices and water carboys. For in-line quality inspection, the material fluoresces blue under low-intensity black light (365 nm). Bondable substrates include PC, PVC, SAN, and PS as well as PET. The adhesive also meets a variety of ISO 10993 biocompatibility approvals.

Dymax® MD® Medical Device adhesives have no solvents added and cure upon exposure to light. Their ability to cure in seconds enables faster processing, greater output, and lower processing costs. When cured with Dymax® light-curing spot lamps, focused beam lamps, flood lamps, or conveyor systems they deliver optimum speed and performance for medical device assembly. Dymax® lamps offer the optimum balance of UV and visible light for the fastest, deepest cures.

MD® 1187-M-GEL medical device adhesive is in full compliance