COMPANY HEADER
Request Information
SpeedMask® maskants have no solvents added and are designed to protect metal components prior to surface finishing processes. The masks are applied in one layer and cure in seconds "on-demand" when exposed to UV/Visible light. They are designed to protect components from harsh grit blasting, acid stripping, laser drilling, and chemical processing. Many maskants feature bright colors to enable easy visual placement onto substrates. After proper cure, the materials also leave no silicone, ionic contamination, or corrosive residues behind. Recommended surfaces include nickel superalloys, high-temperature steel, titanium, cobalt, and stainless steel.

  • UV/Visible light cure
  • Replace labor-intensive application of waxes, tapes, lacquers
  • Spray, dip, or screen print application
  • Conform to complex and intricate configurations
  • Apply, cure, treat, and remove in 4 easy steps
  • New components and design changes require no additional investment
Unit of Measure

Specifications

Brands

 N/A Dymax®

Cure Time

 N/A 3 seconds

Nominal Viscosity

 N/A 25,000 cP

Cured Durometer Hardness

 N/A A63

Cured Modulus of Elasticity

 N/A 48.2 MPa7,000 psi

Note for Cure Time

 N/A Cure time based upon Dymax® 5000-EC Light Curing Flood Lamp System (200 mW/cm²)

Features

Features

 N/A
  • Cures with UV/Visible light
  • Cures with LED light
  • Fluoresces blue under black lights
  • See-Cure - color change on cure
  • Moderate adhesion
  • Trimmable after cure
  • Resistant to strong acid solutions & etchants

Additional Information

Additional Information

 N/A LED-Curable Plating Maskant with Color Change on Cure & Blue Fluorescing Tracer

SpeedMask® 7601 is a high-performance, LED-curable, peelable maskant formulated for surface protection during plating, anodizing (Type II or III), grit blasting, and acid stripping (Hydrochloric, Nitric, and Sulfuric solutions) processes. This maskant fluoresces vivid blue when exposed to low-intensity black light for easy inspection of masking coverage. 7601 has moderate adhesion and can be easily peeled from the non-porous surfaces following the surface treatment process. Recommended surfaces include nickel alloys, steel, stainless steel, aluminum, and titanium.

SpeedMask® resins have no solvents added and cure upon exposure to light. Their ability to cure in seconds enables faster processing, greater output, and lower processing costs. When cured with Dymax® light-curing spot lamps, focused beam lamps, or flood lamps, they deliver optimum speed and performance for many masking applications. Dymax® lamps offer the ideal balance of UV- and visible light for the fastest, deepest cures
  • no solvents added, one-part formulations
  • High visibility colors for accurate material placement
  • One-layer of material is all that's needed