COMPANY HEADER
Request Information
SpeedMask® maskants have no solvents added and are designed to protect metal components prior to surface finishing processes. The masks are applied in one layer and cure in seconds "on-demand" when exposed to UV/Visible light. They are designed to protect components from harsh grit blasting, acid stripping, laser drilling, and chemical processing. Many maskants feature bright colors to enable easy visual placement onto substrates. After proper cure, the materials also leave no silicone, ionic contamination, or corrosive residues behind. Recommended surfaces include nickel superalloys, high-temperature steel, titanium, cobalt, and stainless steel.

  • UV/Visible light cure
  • Replace labor-intensive application of waxes, tapes, lacquers
  • Spray, dip, or screen print application
  • Conform to complex and intricate configurations
  • Apply, cure, treat, and remove in 4 easy steps
  • New components and design changes require no additional investment
Unit of Measure

Specifications

Brands

 N/A Dymax® SpeedMask®

Chemistry

 N/A Ultraviolet (UV)

Nominal Viscosity at 20 Revolutions Per Minute (rpm) Speed

 N/A 500 cP

Uncured Appearance

 N/A Colorless

Durometer Hardness

 N/A D70

Elongation at Break

 N/A 71 %

Modulus of Elasticity

 N/A 270 MPa39000 psi

Cure Time

 N/A 1 seconds

Manufacturing Aids

 N/A Laser Drilling

Type

 N/A Burn-Off

Industry Focus

 N/A Aerospace Metal Finishing Orthopaedic Implants Power Generation Surgical Instruments

Advantages

N/A SpeedMask® Masking Resins offer the following advantages over traditional masking methods:

  • Apply and cure in seconds
  • Residue-free surfaces after proper curing
  • Reliable protection for complex and intricate configuration
  • No additional investment for design changes or new components
  • Superior protection with a single coat
  • Masked components are immediately ready for production

Additional Information

Additional Information

 N/A
  • no solvents added, one-part formulations
  • High visibility colors for accurate material placement
  • One-layer of material is all that's needed